Menu Operation - DeFelsko PosiTector UTG Full Manual

In the event of physical damage, wear, high usage, or after an
established calibration interval, the Gage should be returned to the
manufacturer for repair or calibration.
Adjustment
Adjustment, or Calibration Adjustment is the act of aligning the
Gage's thickness readings to match that of a known reference
sample. See Calibration Adjustment pg. 10.
Gage functions are menu controlled. To access the Menu,
power-up the Gage, then press the center navigation button.
Below is a sample menu for a PosiTector UTG Advanced Model:
Memory
Statistics
Cal Settings
Setup
Connect
Help
Power Off
Exit
Current selection is displayed
with darkened background
To navigate, use the Up and Down buttons to scroll vertically and
Previous Page
(Exit)
Access the Menu
(Center/Select) Down

Menu Operation

Menu Operation
Up
Next Page
Some buttons have a tick box to their
right to indicate current status. An empty
box indicates that feature is not active.
Sync Now
USB Drive
Auto SYNC
Bluetooth
WiFi
Powder Probes
Updates
Exit
Press the (+) button to switch pages in a
multipage menu.
Press the (-) button to return to the previous
menu or page.
Select Exit to exit from any menu.
9
to SELECT.