Table of Contents
Advertisement
Receiving a Call
When somebody calls you, the phone rings. Also, the
icon in the middle of your handset's display and the telephone
lamp on the left of the base will start to blink.
The caller's phone number will be displayed if the telephone
network has transmitted the necessary information.
1. If the handset is on the base, pick up the handset and
speak. Or
If the handset is out of the base, open the flip cover and
speak. Or
If the handset is in the Standby mode with the flip cover
open, press
N o t e:
onds after the flip has been opened to receive a call
in order to prevent the phone from being disengaged.
2. To end the call, close the flip cover or press
N o t e : If you set the 'Ring Delay Time' feature, you can turn
the handset ringer off for the specified time when a call
comes in and other handsets are ringing. Refer to 'Ring
Delay Time' on page 48.
key.
key and
key will not work for three sec-
General Functions
(
)
(
)
key.
21
Advertisement
Table of Contents
