Specifications; D General; D Transmitter; D Receiver - Icom IC-41PRO Advanced Manual

8
Section

D General

• Frequency coverage:
CB 476.4250–477.4125 MHz
RX 450.000–520.000 MHz (RX only)
• Mode:
CB channel
RX channel
• Channel spacing:
CB channel
RX channel
• Current drain (at 7.5 V):
Max. audio
• Power supply requirement: 7.5 V DC nominal*
• Frequency stability:
• Antenna impedance:
• Dimensions:
• Weight:

D Transmitter

• Output power:
• Modulation system:
• Max. frequency deviation:
• Spurious emissions:

D Receiver

• Receive system:
• Sensitivity (12 dB SINAD):
• Squelch sensitivity:
• Intermodulation rejection ratio: 73 dB (typical)
• Spurious response rejection ratio: 70 dB (min)
• Audio output power:
All stated specifications are subject to change without
notice or obligation.

SPECIFICATIONS

8K50F3E
8K50F3E/16K0F3E
12.5 kHz
12.5/25 kHz
TX (at 5 W) approx. 1.7 A
approx. 300 mA
(Negative ground)
*Specified Icom's battery pack
only
±2.5 ppm (–30°C to + 60°C)
50 Ω nominal
W 52.2 × H 111.8 × D 30.3 mm
(Projections not included)
Approx. 270 g (with BP-280)
5 W/1 W (selectable)
Variable reactance
frequency modulation
±2.5 kHz
70 dB (min)
Double conversion
superheterodyne
0.25 µV (typical)
0.25 µV (typical)
0.8 W (typical) at 5%
distortion with 12 Ω load
(INT)
0.4 W (typical) at 5%
distortion with 8 Ω load
(EXT)
17