Keysight Technologies E4980A Configuration Manual page 7

07 | Keysight | E4980A/E4980AL Precision LCR Meters - Configuration Guide
E4980AL Ordering Guide
The following steps will guide you through configuring your E4980AL.
Standard Furnished Item
Description
CD-ROM
CD-ROM
USB Cable
Power Cable
Calibration of Certification
Step 1. Choose Hardware Option (One of the frequency options is mandatory.)
Description
20 Hz to 300 kHz
20 Hz to 500 kHz
20 Hz to 1 MHz
Handler Interface
Scanner Interface
No Interface
Note: There are two interface slots on the rear panel. When neither the E4980AL-201 nor the E4980AL-301 is selected, two of the E4980AL-710 are selected.
When either of them is selected, an E4980AL-710 is selected.
Step 2. Choose General/Miscellaneous Accessory Option (If not required, go to Step 4)
Description
Rackmount Kit
Note: Front Handle Kit and Handle/Rack Mount Kit are not available.
Step 3. Choose Documentation Option
Description
U.S. - English Localization
Japan - Japanese Localization
Step 4. Choose Calibration Certificate Option
Description
ISO 17025 Compliant Calibration
ANSI Z540 Compliant Calibration
Additional Information
Contains User's Guide (in PDF) and Sample Program. See documentation option for printed manuals.
Contains Keysight IO Libraries Suite (the latest versions).
USB (Type A) to USB (Type Mini-B) cable
Option No.
E4980AL-032
E4980AL-052
E4980AL-102
E4980AL-201
E4980AL-301
E4980AL-710
Option No.
E4980AL-1CM
Option No. Additional Information
E4980AL-ABA
Printed manuals are not furnished. Order documentation option if required.
E4980AL-ABJ
Option No. Additional Information
E4980AL-1A7 ISO 17025 compliant calibration
E4980AL-A6J ANSI Z540 compliant calibration
Additional Information
Adds handler interface
Adds scanner interface
Attaches a blank panel
www.keysight.com/find/LCRmeters