Measurement Setup; Measurement Procedure - Agilent Technologies 4263B User Manual

Electrolytic Capacitor Measurement|For High Capacitance
DUT
Requirements

Measurement Setup

For high capacitance measurement, equivalent series
1
parameter Cs-D is commonly used.
Even though LVL:1 Vrms is set, less than 0.5Vrms
2
which is maximum appliable volatge for testing
electrolytic capacitors in accordance to JIS standard,
will be applied to the Aluminum electrolytic capacitor
under test.

Measurement Procedure

3-2 Measurement Examples

1
2
Yes
6
4263B