Battery - HP 14-ck0 Series Maintenance And Service Manual

Battery

Description
Battery (3-cell, 48 WHr, 4.212 Ahr)
Before removing the battery, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
Remove the battery:
1. Remove the five Phillips M2.0×3.0 screws (1) that secure the battery to the computer.
2. Remove the battery from the computer (2).
Reverse this procedure to install the battery.
When installing the battery, be sure to install screws in the proper locations. The following image shows the
locations around the battery that have holes but do NOT require screws.
Bottom cover on page 29).
Spare part number
L11119-855
Component replacement procedures 31