Power Connector Cable (Dc-In) - HP 14-ck0 Series Maintenance And Service Manual

Power connector cable (DC-in)

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the display (see
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Remove the cable from the clip (2).
3. Remove the power connector cable out of the computer (3).
Reverse this procedure to install the power connector cable.
Bottom cover on page
Battery on page 31).
Display assembly on page
29).
53).
Component replacement procedures
Spare part number
L23188-001
51