Skoda Bolero Operating Instructions Manual page 37

Note
During the pairing process the option in the telephone to remember the
■
password for the next automatic connection can be selected
During the pairing process, some telephones require a confirmation regard-
■
ing the connection of Bluetooth
The maximum number of telephones registered is 20. Coupling a new tele-
■
phone after reaching the maximum number causes the telephone that has not
been coupled for the longest time to be automatically replaced.
conditions for coupling

Read and observe on page 34 first.
To connect a telephone with the device, the two devices must be paired.
Prerequisites for successful pairing:
The ignition is switched on.

®
The Bluetooth function of the device

switched on.
The visibility of the device » page 15

The visibility of the telephone is switched on.

The telephone is within range of the Bluetooth

The telephone is supported by the device.

The pairing can be initiated from the device or from the telephone.
Note
®
Available updates for Bluetooth
ephone support can be obtained from the ŠKODA website www.infotain-
ment.skoda-auto.com.
Coupling - no telephone connected

Read and observe on page 34 first.
›
Press the button .
Telephone
In the device screen the message Please search for and connect a mobile tel-
ephone. appears and a menu with the following function keys.
1)
This function is only supported by some telephones.
.
1)
®
Profile A2DP and AVRCP.
» page 15 and the telephone is
and the telephone is switched on.
®
signal of the device.
devices as well as information about the tel-
›
Find telephone - search for available telephones with activated Bluetooth
function and visibility
›
 - Opening of the settings menu
After pressing the function key Search telephone the search for available devi-
ces starts. After about 30 seconds a list of found devices appears, which is up-
dated up to 1 minute after the start of the search appears.
›
If you do not want to wait for the display of the list press the function key
Results .
›
Select the telephone you want from the list of available telephones.
›
Confirm the coupling » page 37.
After pairing confirmation the telephone is connected to the device as the
main telephone » page 32.
Coupling - connected telephone

Read and observe on page 34 first.
›
In the menu Telephone press the function key
name of the main telephone.
›
In the list of paired telephones press the function key Search telephone .
A search for available devices starts. After about 30 seconds a list of found de-
vices appears, which is updated up to 1 minute after the start of the search ap-
pears.
›
The function key Results is to be pressed if you do not want to wait for the
display of the list.
›
Select the telephone you want from the list of available devices.
In the device screen the message Choose whether you would like to replace
the main telephone ... or whether you would like to add ... as an additional
telephone. along with the following menu.
›
Cancel - Cancel the coupling
›
Replace - Coupling and replacement of the main telephone
›
Add - Coupling as an additional telephone
›
Confirm the coupling » page 37.
After pairing confirmation the telephone connects to the device.
» page 33, Settings
» Fig. 19 on page 31with the
B
Communication
®
35