Skoda Bolero Operating Instructions Manual page 48

Infotainment radio
Hide thumbs Also See for Bolero:
Table of Contents

Advertisement

Settings
Function problems
First and foremost, pay attention to the safety instructions
tant notes.
MirrorLink
provides a function for the operation of some installed applica-
tions in the communication facility (e.g. telephone, hereinafter referred to only
as facility) by using the device.
Using this function is only for specially designed and certified applications. For
reasons of safety, the operation of some applications while driving is limited or
not possible (function keys of the applications are inactive).
WARNING
No objects such as mobile telephone mounts, etc. must be attached to
the covers of the airbag modules or be located within their immediate vicin-
ity.
Never leave communication facility in the deployment area of an airbag,
on a seat, on the dash panel or in another area, from which it can be
thrown during a sudden braking manoeuvre, an accident or a collision -
there is a risk of injury. There are storage compartments with lids and if
necessary there is the multimedia storage compartments to hold this
hicle owner's manual, chapter Transport and practical equipment.
CAUTION
MirrorLink
Applications that use a mobile data connection, are dependent
on the quality of the signal supplied by your telephone service provider. ŠKODA
accepts no responsibility for the transmitted data volume.
An intensive use of the function MirrorLink
applications (e.g., GPS, mobile data, fully-backlit display and the like.) can lead
to battery discharge of the connected facility.
Connection conditions
Read and observe
and
The connection between the facility and the device using the function
MirrorLink
is operational under the following conditions.
46
Communication
» page
and the work associated with
on page 46 first.
47
The ignition is switched on.
47
The facility supports the function MirrorLink
that support this feature.
4, Impor-
The facility is connected to the USB input
Start function
Read and observe
Press the button
A list of the facilities connected to the USB input is displayed.
Select one of the MirrorLink
If the facility is separated from the USB cable and the ignition is not off, it au-
tomatically reconnects when a new connection to the device is made.
Note
If the facility is connected by means of the function MirrorLink
used as a USB audio source Media menu.
As long as the function MirrorLink
be switched on.
»
Ve-
The list of available facilities and applications, which support the MirrorLink
function, can be seed in the ŠKODA Internet pages www.infotainment.skoda-
auto.com
and contains applications
» Fig. 17
and
on page 46 first.
→ 
.

function supporting facilities.
is used, the display of the facility must
on page 26.
, it cannot be

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents