Skoda Bolero Operating Instructions Manual page 34

Symbols in the display
Symbol
Charge status of the telephone battery

Signal strength of the mobile wireless connection

Active roaming (before the name of the mobile network

provider)
a)
Missed call

Current call

Incoming SMS

a) This function is only supported by some telephones.
Main / additional phone

Read and observe and
Up to 2 telephones can be connected via Bluetooth
same time one of them can be connected with the audio profile A2DP or
AVRCP. Therefore the functions of the telephones can be operated via the de-
vice.
One of the telephones can be set as main telephone, the other telephone as
an additional telephone.
Main telephone
The main telephone provides the ability to perform the following functions de-
pending on the type of the connected telephone.
›
Acceptance of the incoming call
›
Direct entry of a telephone number
›
Dial a number from the contact list
›
List of telephone contacts / import telephone contacts
›
Call list
1)
›
Dial the breakdown number
2)
›
Dial the info number
2)
›
Conference call
›
Management of text messages (SMS)
1) This function is only supported by some telephones.
2)
The function is only available for some countries.
32
Communication
Meaning
a)
a)
on page 30 first.
®
profile HFP and at the
1)
1)
1)
The name of the device connected to the telephone as a main telephone is
displayed in the function key
Additional telephone
The additional telephone offers you the opportunity to accept or reject the in-
a)
coming call (when a telephone call is performed by the main telephone).
The name of the device connected to the telephone as an additional tele-
phone is displayed in the function key
Change the main telephone to an additional phone
›
Press the function key 
tional telephone.
The functions of the main and additional telephones are switched with each
other.
Note
The contact list is valid for the main telephone. If the incoming call is accepted
by the additional telephone and you find the telephone number in the contact
list of the main telephone, then the caller details (e.g. name, image, etc.) is dis-
played instead of the number.
®
Bluetooth - connection profile

Read and observe
Profile types
With the device several telephones can be paired, but only two telephones can
actively be using the Bluetooth
telephone can be connected via the Bluetooth
» Fig. 19 on page 31.
B
» Fig. 19 on page 31.
C
» Fig. 19 on page 31with the name of the addi-
C
Fig. 20
List of paired devices - Bluetooth
® profiles
and on page 30 first.
®
profile HFP and at the same time only one
®
profile A2DP or AVRCP .
