Skoda Bolero Operating Instructions Manual page 38

Coupling - two telephones connected

Read and observe on page 34 first.
›
In the menu Telephone press the function key
name of the main telephone.
›
In the list of paired devices press the function key Find telephone .
A search for available devices starts. After about 30 seconds a list of found de-
vices appears, which is updated up to 1 minute after the start of the search ap-
pears.
›
The function key Results is to be pressed if you do not want to wait for the
display of the list.
›
Select the telephone you want from the list of available telephones.
In the device screen the message ... cannot be connected appears. Please se-
lect if you want the main telephone ... or the additional telephone ... to be re-
placed. to appear with the following menu.
›
Cancel - Cancel the coupling
›
Main tel. - Replacement of the main telephone
›
Addition. tel. - Replacement of the additional telephone
If you have a telephone, which is connected to the device via the Bluetooth
®
audio profile A2DP or AVRCP, which you want to replace, then the message
There are two devices already connected. appears in the device screen.
Please first disconnect at least one of these devices in order to: ... be able to
connect.
To establish the connection, the audio Bluetooth
be separated » page 32 or the second telephone which is not connected to the
audio profile, is to be selected and replaced.
›
Repeat the coupling process by selecting the telephone from the list of
found devices.
›
Confirm the coupling » page 37.
After pairing confirmation the telephone connects to the device.
1)
For the name of the device refer to the Bluetooth
36
Communication
» Fig. 19 on page 31with the
B
®
profile A2DP or AVRCP is to
®
settings » page 15 .
Coupling - more options of the telephone search

Read and observe on page 34 first.
The telephone can also be picked out as follows and then coupled.
›
Press the function key  → Bluetooth → Find telephone→ Find tele-
phone→ Results press and to select the desired telephone.
›
Press the function key  → Bluetooth → Find devices→ Results press and
select the telephone and a Bluetooth
file » page 32.
›
Press the function key  → Bluetooth → Paired devices → Find (this func-
tion key is available when no telephone is connected to the device).
After the desired telephone and the Bluetooth
selected profile, must be chosen depending on the number of connected tele-
phones, if the telephone has to be connected as a main or additional phone.
After the coupling has to be confirmed
Connect telephone to the device

Read and observe on page 34 first.
When pairing from the telephone, follow the instructions in the telephone
owner's manual.
›
Have the telephone search for available Bluetooth
›
Select the device in the list of devices
The device is displayed in the telephone to be connected to as SKODA BT ....
... is replaced with the last four symbols of the vehicle identification number
(VIN) of your vehicle.
You can change the name of the device
The following message is shown in the device screen during pairing ... Would
you like to connect?, and the following function keys are displayed.
›
Connect - confirmation of the coupling process.
›
Cancel - stops the coupling process.
If no telephone with the device is actively connected, the telephone connects
as the main telephone » page 32.
®
- Select a connection pro-
®
Has been searched out and
» page 37.
®
devices.
.
1)
» page 15.
