Sewing A Stitch Program - Husqvarna Viking Sapphire 960Q User Manual

SEWING A STITCH PROGRAM

To sew the stitch program, load it by touching the OK icon
at the top right corner in the program window. You can
also press on the foot control and the stitch will load and
you will start to sew.
Adjust the Entire Program
To adjust the entire program, close the program window.
Adjustments made outside of Program mode will affect the
whole program.
SAVE TO MY STITCHES
at the top right hand corner to load the program. Touch
window will open. There are four menus, which you can
scroll between using the arrows at the bottom of the
screen.
Previously saved stitches or stitch programs are shown
in the
a free position, and your stitch or stitch program is stored
there.
Touch an occupied position and a pop-up message will ask
to replace the old stitch with the new one. Touch Cancel
to close the pop-up message, and choose another saving
position.
Delete Saved Stitch or Program
To delete a saved stitch or program, touch Delete and then
touch the stitch or stitch program. A pop-up message will
Note: If you Touch & Hold Delete, you can delete all your stitches
on that menu. Once you have touched the delete icon, an image will be
shown at the bottom of your screen. As long as that image is shown
the Delete funtion is active, and you can delete stitches.Touch the
Delete to deactivate the function.
5:4
OK
Save to My
Stitches
Delete