Pack Away After Sewing; Free Arm; Usb Port - Husqvarna Viking Sapphire 960Q User Manual

USB PORT

Note: Make sure that the USB stick you use has the format FAT32.
CONNECT TO AND REMOVE FROM USB PORT
Insert the
do not force it into the port!
Note: Do not remove the USB stick when the hourglass is shown on

PACK AWAY AFTER SEWING

1. Press the
2. Unplug the cord from the wall socket and then from
the machine.
3. Unplug the foot control cord from the machine. Wind
the foot control cord and place inside the open area on
the underside of the foot control.
on to the machine, behind the free arm.
5. Place the foot control in the space above the free arm.
6. Place the hard cover over your machine.

FREE ARM

accessory box to the left when you wish to remove
it and use the free arm.
Use the free arm to facilitate sewing trouser legs and sleeve
hems.
To replace the accessory box, slide it onto the machine until
S U 2:3
ET P