Function Buttons - Husqvarna Viking Sapphire 960Q User Manual

FUNCTION BUTTONS

Speed + and -
SPEED + AND -
All stitches in your machine have a pre-set, recommended
sewing speed.
screen will indicate the speed setting. You can set the
speed by touching the slider in the pop-up message. If you
change the speed setting while sewing no pop-up message
will appear.
When sewing with metallic threads, or when sewing on
delicate fabrics, lower the speed for optimal results.
SELECTIVE THREAD CUTTER
cuts the top and bobbin threads, raises the presser foot and
the needle, and activates the
To cut threads at the end of a stitch or stitch program, touch
or stitch program is completed, the machine will make a
page 5:3.
Note: Your machine cuts the threads automatically after certain
stitches such as completing a Sensor One Step Buttonhole. Automatic
Selective Thread Cutter Auto can be cancelled in the SET Menu, see
page 3:8.
3:2
STOP
FIX
Start/Stop
Reverse
Selective Thread Cutter
Sensor Foot Up and Extra Lift
Sensor Foot Down and Pivot
NEEDLE STOP UP/DOWN
or down. The setting of the needle stop position is changed
at the same time. You can also tap the foot control to raise
the function is active. Touch the lit button to turn the function
off.
STOP
thread and stops automatically when one stitch or stitch
only one stitch is displayed on the Interactive Color Touch
can be programmed, see page 5:3.
Needle Stop Up/Down