Function Buttons - Husqvarna Royale User Manual

Start/Stop
Speed + and -
STOP
(Monochrome)
FIX
(Baste)

FUNCTION BUTTONS

mode functions are in brackets)
START/STOP
Touch this button to start and stop the machine sewing
or embroidering without using the foot control. Touch
SPEED + AND -
sewing speed. When you select a stitch, your machine
automatically sets the best sewing speed for that stitch.
maximum allowed sewing speed. When not sewing, touch
in the pop-up message. If you change the speed setting
while sewing no pop-up message will appear.
STOP (MONOCHROME)
Sewing Mode
thread and stops automatically when one stitch or stitch
cancelled when the stitch is completed.
Embroidery Stitch-Out
3:14
3 Ultimate Interactive Screen
Sensor Foot Up and Extra Lift
Sensor Foot Down and Pivot
(Embroidery
Needle Stop Up/Down (Trim position)
Selective Thread Cutter
FIX (BASTE)
Sewing Mode
a few tie-off stitches and continues with the selected stitch.
programmed, see Program chapter.
Note: FIX Auto can be cancelled in the SET Menu, Sewing Settings
FIX button on your machine.
Embroidery Stitch-Out
area to baste the fabric to the stabilizer.
SENSOR FOOT DOWN AND PIVOT
The presser foot is lowered automatically when you start
sewing.
Sewing Mode
presser foot will be completely lowered. The machine
Embroidery Mode
SENSOR FOOT UP AND EXTRA LIFT
a second time and the presser foot will raise to Extra Lift,
and the feed teeth are lowered automatically to make it easy
to get thick fabric under the presser foot.
Stitch Re-Start