Pack Away After Sewing; Accessory Tray - Husqvarna Platinum 770 User Manual

Pack Away After Sewing

1. Press the power switch to turn off the
machine.
2. Unplug the cord from the wall socket
fi rst and then from the machine.
3. Wind the main cord around your
hand and place the cord in the
pocket of the hard cover. Here you
can also place the User's Guide and
the Handbook.
4. Unplug the foot control cord from the
machine. Wind the foot control cord
around your hand and place it in the
space of the foot control.
5. Check to ensure that all accessories
are in the accessory tray. Slide the
tray on to the machine around the
free arm.
6. Place the foot control, with the
underside towards you, fi tting into
the recess of the accessory tray at the
rear side of the machine.

Accessory Tray

In the accessory tray there are special
places for presser feet, and bobbins plus
space for needles and other accessories.
Store the accessories in the tray so they
are easily accessible.
Remove the Accessory Tray
To use the free arm, you have to
remove the accessory tray. When
attached, there is a plastic hook that
keeps the accessory tray locked to the
machine. There is a button on the left
underside of the accessory tray (1) that
is used to unlock and remove it. Press
the button upwards and slide the acces-
sory tray to the left, passing the stop
position, and remove it.
1.
Learn your Platinum 770
5