Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Eswood IW-3N
Summary of Contents for Eswood IW-3N
- Page 1 EQUIPMENT MANUAL IW-3N COMPACT GLASS WASHER JUNE 2011...
-
Page 2: Table Of Contents
Important: Prior to Installation General Description Technical Specifications Installation Initial Start-up Procedure Washing Operation Shutdown and Maintenance Trouble Shooting 10 - 11 Wiring Diagram Spare Parts List 13 -14 Drawing 15 -16 Spare Parts & Service ESWOOD OPERATING MANUAL IW-3N June 2011... -
Page 3: Important: Prior To Installation
(Refer to last page of this manual for your closest branch for Warranty repair services) Note: It is the responsibility of the owner to ensure the water feed to Eswood Dish and Glass washers is of a quality that will not form excessive build up of calcium and other dissolved minerals on the heating elements. -
Page 4: General Description
Quality, Reliability and Performance: Eswood has a reputation for product reliability that is second to none. The finest of stainless steel and durable synthetic materials are used, and all Eswood products are fully guaranteed and backed by a national support network. -
Page 5: Technical Specifications
7 Litres per cycle (Hot cycle) Hot and Cold water usage 7 Litres hot water (Hot & cold cycle) 2.5 Litres cold water Wash/Rinse Temperature C to 85 Electrical Input Electrical Input 240V, 50Hz, 1 phase, 14 Amps max ESWOOD OPERATING MANUAL IW-3N June 2011... -
Page 6: Installation
Note that all electrical work is to be done in accordance with the rating plate on the lower panel. The IW-3 comes standard with a detergent injection system that has already been factory calibrated. IN RUN POSITION ESWOOD OPERATING MANUAL IW-3N June 2011... -
Page 7: Initial Start-Up Procedure
Check the other cycle in the same way. Check for leaks and refit the lower panel. ESWOOD OPERATING MANUAL IW-3N June 2011... -
Page 8: Washing Operation
With the “READY” pilot light on, push the Start button. While the machine is running the amber “CYCLE” light is illuminated.(see Figure 2.) Check that the drain outlet is free from debris such as paper, toothpicks and sliced fruit. GREEN “STAR AMBER CYCLE GREEN SELECTOR FIGURE 2. ESWOOD OPERATING MANUAL IW-3N June 2011... -
Page 9: Shutdown And Maintenance
Clean the exterior of the machine with a damp sponge. Do not pass water over the electrical controls and avoid abrasives or strong detergents. Leave the door open to allow the machine to air. ESWOOD OPERATING MANUAL IW-3N June 2011... - Page 10 (b) Check for foreign matter in wash arm jets. Clean if necessary. (c) Check that glasses to be washed are correctly placed in racks. (d) Check temperature of break tank. If incorrect check thermostat setting and heating element. ESWOOD OPERATING MANUAL IW-3N June 2011...
- Page 11 (e) Check that the line strainers are not partially blocked. If so, remove and clean filter. Insufficient rinse (a) Ensure that temperature of incoming Temperature water supply is at least 65ºC ESWOOD OPERATING MANUAL IW-3N June 2011...
-
Page 12: Wiring Diagram
IRING IAGRAM ESWOOD OPERATING MANUAL IW-3N June 2011... -
Page 13: Spare Parts List
HOSE CLAMPS 22-38 HC-116 HOSE CLAMP 35-48 HC-121 HOSE CLAMP 44-56 IW-3A03 RINSE TANK ASSY IW-3A06 WASH "T" JUCTION IW-3A11 WASHARM ASSY IW-3A12 BRIDGE BRACKET ASSY IW-3M01 LOWER RINSE BEARING PIN IW-3M01-1 UPPER RINSE BEARING PIN ESWOOD OPERATING MANUAL IW-3N June 2011... - Page 14 SS-154 PRESSURE SWITCH SS-201 START BUTTON (GREEN) SS-250 MICRO SIWTCH 16A 43MM LEVER SS-256 ROTARY SWITCH + KNOB SS-257 ELECTRONIC TIMER SS-258 BASE TIMER WA-148P 1" WASHER - CHROME WA-150P 3/4" WASHER – CHROME ESWOOD OPERATING MANUAL IW-3N June 2011...
-
Page 15: Drawing
RAWING ESWOOD OPERATING MANUAL IW-3N June 2011... - Page 16 RAWING ESWOOD OPERATING MANUAL IW-3N June 2011...
-
Page 17: Spare Parts & Service
Number: (Applicable to landline only charges apply for calls made from a Mobile Phone) 1800 013 123 This number will automatically access your nearest State office, or the technician on duty if after hours. After hours charges apply. ESWOOD OPERATING MANUAL IW-3N June 2011...
Need help?
Do you have a question about the IW-3N and is the answer not in the manual?
Questions and answers
Takes a long time to start wash, then washes correctly
The Eswood IW-3N takes about 10–15 minutes to start the wash cycle because it needs time for the initial heating of water in the break tank after the power is turned on.
This answer is automatically generated