Removing A Fan - IBM Slicestor 2448 Appliance Operation Manual

2. At the command prompt, type poweroff.
3. After the appliance is powered off, remove the power cord and network cables from the back of the
chassis.
4. Insert finger and thumb into fan assembly holder slots and pull fan assembly out of fan cage.
Figure 11. Removing a fan
5. Insert another fan assembly for replacement.
6. Keep your fingers away from fan blades.
Replace a 2.5 in. rear loading OS drive
1. Log in to the device as localadmin.
2. At the command prompt, type poweroff.
3. After the appliance is powered off, remove the power cord and network cables from the back of the
chassis.
4. Locate the failed drive in Rear Drive-Bay 0, and pinch together the two tabs to open the drive
release handle.
5. Pull upward on the release handle to slide the drive tray out of the drive bay, as shown in the
following figure.
16
IBM Cloud Object Storage System
™
: Slicestor 2448 Appliance Manual 3409-S01/3401-S01/3403-S01