Sewing Buttonholes - Husqvarna Viking Sapphire 930 User Manual

Sewing buttonholes

The buttonholes in your sewing machine are specially adjusted
for different kinds of fabric and garments. Look at the stitch
buttonhole.
interfaced and/or stabilized where buttonholes are to be sewn.
Automatic One-Step Sensor Buttonholes
the button on the GraphicDisplay using the up and down arrow
buttons. When sewing, your sewing machine automatically
sews, every buttonhole will be the same size.
Note: The buttonhole size will vary with the thickness and style of your
2. Plug the cord into the socket to the left above the needle area.
3. Measure the button diameter using the button measuring
chart on the front of the machine.
4. Use the up and down arrow buttons to set the button size on
the GraphicDisplay. The size can be set between 0-50 mm.
3
lifting it, which makes it easier to place the fabric under the
Place the edge of the garment at the middle mark to have
6. Before sewing, line up white area on the side of the red wheel
with the white marking line on the foot.
from you stabilizing the left buttonhole column, then the
satin column is sewn toward you. This is repeated for the
right column. The bartacks are also sewn automatically.
The arrows on the GraphicDisplay will show when each
part of the buttonhole is sewn and in what direction. Keep
The machine will stop automatically when the buttonhole is
complete.
44
Basic sewing techniques
feature will select the best
®
1:0, 1:28, 1:30-1:33 Buttonhole Stitches
Fabric: All types of fabric.
Select: The fabric you are using and the
feature selects a
®
Use:
and the needle recommended for your fabric.