Function Buttons - Husqvarna Viking Sapphire 930 User Manual

Function buttons

2
1. Speed buttons
All stitches in your sewing machine have a pre-set, recommended
machine. The speed level is shown on the GraphicDisplay. You
cannot select a higher speed than the default max speed for the
selected stitch.
2. Thread Cutter
Press the Thread Cutter and your machine ties off the threads,
cuts the top and bottom threads, raises the presser foot and the
threads at the end of a stitch or stitch program, press the Thread
program is completed, the upper thread and bobbin will be cut.
Note: After a buttonhole or an eyelet is sewn, your machine cuts
automatically. Automatic Thread Cutter can be cancelled in the SET
Menu, see page 32.
22
Operating the machine
2
1
6
4 5
7 8
9
3
3. Needle Stop Up/Down button
Press this button to move the needle down or up. The setting of
the needle stop position is changed at the same time.
The upper LED next to the button is lit when needle up is
activated and the lower LED is lit when needle down is activated.
You can also tap the foot control to raise or lower needle. If
both the needle and the presser foot are in up position, only the
presser foot will be lowered when you tap the foot control the
4. Stop button
the stitch. Your sewing machine ties off the thread and stops
automatically when one stitch unit or stitch program has been
Press the button again if you wish to activate it once more.
Automatic Tapering stitch with the same size.
Tip: If you want to repeat the STOP function for a stitch unit several times
in a row you can save the stitch with a STOP at the end in a program (see
Programming, page 29).