Sharp SJ-XF50X-T Service Manual page 50

SJXF50XT
6) Ice maker ass'y T-SK
<Components>
<Assembling procedure>
1. Put Thermistor on back side of Ice cube tray AT.
• Pu t Selar on Thermistor, cover them with Thermistor cover and fix by 4 claws and square holes.
• Place the Sealer on the Thermistor, and put the Thermistor cover over it and fix it with four claws
(square holes, round protrusions).
square hole
2. Insert the ice cube heater along the groove of the ice cube tray AT.
• Attach it without twisting the heater so that the mark can be seen around the entire circumference.
I-grill
Harness cover
Ice maker ass'y
Plate
Ice senser
L-band C
Thermistor cover
Sealer
claw
Thermistor
Ice cube tray AT
Ice cube heater
1.5
Mark of Ice cube heater
Align the end face of
Put it well. the mold with the rib.
How to install the ice cube maker
Ice cube maker
Ice cube tray AT
Thermistor
Thermistor cover
Sealer
Ice cube heater
Ice heater cover T
Ice cube tray AT
rib
The marking existence side
Ice cube tray AT
Align the end face of
the protective tube with the rib.
Loosen.
Attach the end face of
the protective tube to the boss.
(Figure of back side)
50
Thermistor
Set the rib between
the 2 lead wires.
rib