Sharp SJ-XF50X-T Service Manual page 37

2. Attach the A-sealer EV. cover B to the harness of duct heater.
3. Attachment of the EV-insulation A and B.
• Fasten these parts with paper tape.
Seal the paper tape so that there is no space between EV-insulation A and B.
Apply A-sealer EV. cover B
so that there is
no clearance between
EV-insulation A and B.
Paper tape
EV-insulation A
Duct heater
EV-insulation B
A-sealer EV. cover B
A
A
Duct heater
Put it on so that there is no space
between the sealer and the insulation.
Attachment side
of heater
EV-insulation B
Cross-sectional view A-A
EV-insulation A
EV-insulation B
EV-insulation B
Left side
Wrapping the
A-sealer EV. cover B
Paper tape
Paper tape
Front side Right side
37
EV-insulation A
Back side
SJXF50XT