Sharp SJ-XF50X-T Service Manual page 43

3. Fasten the packing holder to the assembly of Step 2 with two screws.
• Tightening torque is 3.5 to 4.5 kgf/cm (0.34 to 0.44 Nm).
• Insert the gear pump harness in the groove of the R-C box, and bend the R-C box hinge so that the Claw is
securely engaged.
• Attach the gear pump harness inserted in the R-C box groove to the Claw of the R-C box securely.
4. Insert the joint pipe to the gear pump.
• Insert securely.
• Attach the joint pipe vertically as shown the figure.
• Mount the R-thermistor to the R-C box.
R-thermistor
・
・
Paper tape
5. Insert the damper to the R-C box insu. B.
• Insert the R-C box insu. B to the R-C box insu. A.
Engage the hook.
Ａ
・
・
Ａ
R-C box insu. A
・
Screw
・
・
Attach the joint pipe vertically
Joint pipe
Attach the harness
to the hook.
R-C box insu. B
・
43
・
Packing holder
Hinge
Groove of R-C bo
Gear pump
・
・
Cross-sectional view A-A
SJXF50XT