Adjusting Of The Armpads - Vermeiren Eclips X4 KIDS Instruction Manual

3.10.2 Depth of the footplate
Adjust the depth of the footplate as follow (in three different positions: steps 20 mm):
1. Remove the screws 
2. Adjust the depth of the foot rest to a comfortable position
Position 1: hole 2 and 4
Position 2: hole 3 and 5
Position 3: hole 4 and 6
3. Tighten the screws  properly
A

3.11 Adjusting of the armpads

L CAUTION:
Risk of clamping – Do not place fingers, buckles and clothes between
the splash guards and rear wheels.
(Fig B).
(Fig B).
The armpads of the wheelchair can be
adjusted in 2 different positions.
Height of armpad
Table 2: Height of armpad
1. Remove the screws .
2. Grasp the cloth protector  on the top.
3. Remove the cloth protector .
4. Adjust the cloth protector  in the desired
position.
5. Mount the cloth protector .
6. Tighten the screws  properly.
7. Check that the cloth protector  is firmly
fixated.
Page 20
.
(Fig A)
Holes
150 mm A
180 mm B
Eclips X4 kids
2016-01
B