Toshiba RAS-25PAVPG-ND Service Manual page 58

2. AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation.
1. Press Press : Select
2. Press Press : Select the desired temperature
3. Press Press : Select AUTO, LOW , LOW+
3. 8°C OPERATION
1. 1. 1. P P ress button to change Fireplace1, Fireplace2 and 8°C operation
2. 2. Pre Press to adjust setting temperature from 5°C to 13°C
Note1 : 8°C will operate in Heating mode only. should be charge mode
to Heating mode before use.
Note2 : With Fireplace operation on heating mode indoor unit always runs
and cold air breezing might be occurred.
4. COOLING / HEATING / FAN ONLY OPERATION
1. Press Press : Select Cool
2. Press Press : Set the desired temperature
Cooling: Min. 17°C, Heating : Max, 30°C, Fan Only: No temperature indication
3. Press Press : Select AUTO, LOW , LOW+
Note : QUIET is ultra low fan speed for quiet operation.
5. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. 1. . Pre Press
: Select Dry
2. Pre ss
: Set the desired temperature.
6. PLASMA IONIZER PURIFIER OPERATION
During air conditioner operation
Press PURE to start and plasma ionizer purifier operation.
The plasma air purifier and plasma ionizer purifier can be activated or deactivated during
air conditioner is stopped and the plama ionizer purifier starts in conjunction with plasma
plasma ionizer purifier operation.
7. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating
operation (except in DRY and FAN ONLY mode)
Press Press : Start and stop the operation
FIREPLACE and 8°C operation.
Fireplace#1
Fireplace#2
Normal
operation
, Heat , or Fan only
, MED , MED+ , HIGH
8°C
, MED , MED+
- 58 -
FILE NO. SVM-17050
or Quiet
HIGH or Quiet