Toshiba RAS-25PAVPG-ND Service Manual page 55

Notes
1. Place the remote control where the indoor unit can receive the signal. This will increase the accuracy of the timing between the remote control and the air
conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In this situation, the air conditioner will fi rst follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP, FAN, Hi-POWER, ECO and etc., can be adjusted but when the clock reaches
the program setting, the operation will return to the set items in the program.
4. When the remote control is sending a signal to the air conditioner, avoid interference from objects that can block the signal.
5
Press to select desired operation.
6
Press or
•
The temperature can be set between 17°C and 30°C.
7
Press to select the desired fan speed.
8
Add operations, if required.
•
Press to use 8°C operation.
•
Press to use ECO operation
•
Press to use Hi-POWER operation.
•
Press to use SILENT operation.
9 Adding or editing the program.
The program can be set to perform on all the required days until
!
confi rm the setting
If adding or editing a program is required, please repeat steps
confi rmation.
!
After adding or editing, press
Weekly timer running
Next program
Timer ON or OFF
*Point remote control at air conditioner receiving module then, press SET button until
you hear the "PiPi" sound. This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will hear separate "Pi" sounds
corresponding to the number of days in the selected setting.
An incomplete setting is indicated if the TIMER lamp is blinking. Press
- 55 -
FILE NO. SVM-17050
to select desired temperature.
.
to confi rm the setting*.
Operating Mode
Next operation Operating Temperature
time and Fan speed
is pressed to
2 8
- before setting
Display after
pressing SET
button
twice.