Opening Top Cover - WaterLogic WL400 Service Manual
Hide thumbs
Also See for WL400:
- Manual (84 pages) ,
- Operating, installation and service manual (73 pages) ,
- Installation procedures manual (14 pages)
Table of Contents
Advertisement
1. Remove screws from slide locks located near
dispenser.
2. Push Slide Locks inward toward dispensing area.
3. Pull Cover forward and lift from the front to open Top Cover.
4. Locate Top Cover Support Arm attached to left
side panel.
5. Lift Support Arm from the front and align with top
cover to hold top cover in place.
WL400 Manual Page 23 – Revision: 5‐2‐2018
OPENING TOP COVER
Remove Two Screws
Slide Locks Open
Advertisement
Table of Contents
Need help?
Do you have a question about the WL400 and is the answer not in the manual?