Connection Port Information - Amcrest AMDV4M4 User Manual

4. Turn the device upside down
and then turn the screws in
firmly in the chassis.
7. Put the cover on in accordance
with the clip and then place the
upper cover back on.
Note:
•
An HDD is included with the DVR by default.
•
To connect the HDD, connect the HDD data cable and the power cable before attaching the HDD in the device.
•
To remove the front cover, push the clip first, and then slide the cover off.

3.3 Connection Port Information

3.3.1 Power Supply Connection
Please check to make sure the input voltage is correct, and the power button is in the off position when connecting
the power supply.
We recommend you use an Uninterruptible Power Supply (UPS) to guarantee steady operation of the DVR, as well
as to elongate the life span of the DVR and other peripheral equipment such as attached cameras and other
accessories.
3.3.2 Video Input/Output Connections
3.3.2.1 Video Input Connection Information
The video input interface is BNC.
The input video format includes: PAL/NTSC BNC (1.0VBP- P, B75Ω)
The video signal should comply with your national standards.
5. Attach the HDD firmly.
8. Secure the screws in the rear
panel and the side panel.
6. Connect the HDD cable and
power cable.
15