Connection Port Information; Power Supply Connection - Amcrest AMDVTENL8 User Manual

4. Turn the device upside down
and then turn the screws in
firmly in the chassis.
7. Put the cover on in
accordance with the clip and
then place the upper cover back
on.
Note:
•
An HDD is included with the DVR by default.
•
To connect the HDD, connect the HDD data cable and the power cable before attaching the HDD in the
device.
•
To remove the front cover, push the clip first, and then slide the cover off.

3.3 Connection Port Information

3.3.1 Power Supply Connection

5. Attach the HDD firmly.
8. Secure the screws in the rear
panel and the side panel.
6. Connect the HDD cable and
power cable.
19