5
8. EACH SETTING AND ADJUSTMENT
8.1 NECESSARY ITEMS TO BE NOTED
After repairing, be sure to check the version of the firmware, and if it is not the latest one, update to the latest version.
Perform the each item when the following parts are replaced.
• MAIN Assy
• MIXB Assy (EUP UCOM: IC3601)
• Jog dial section component part
5
6
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Factory reset
(Be changed user setting to condition before the repair
when be possible)
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Confirmation of the specified value by Jog dial Rotation
Time measurement mode
XDJ-RX
6
7
7
8
A
B
C
D
E
F
59
8