Product Overview - Hach 2200 PCX Basic User Manual

Product overview

Chemical or biological hazards. If this instrument is used to monitor a treatment process and/or
chemical feed system for which there are regulatory limits and monitoring requirements related to
public health, public safety, food or beverage manufacture or processing, it is the responsibility of the
user of this instrument to know and abide by any applicable regulation and to have sufficient and
appropriate mechanisms in place for compliance with applicable regulations in the event of malfunction
of the instrument.
Fire hazard. This product is not designed for use with flammable liquids.
The 2200 PCX particle counter is used for drinking water applications. The 2200 PCX does not have
data storage capability. The instrument uses a particle counting sensor with a laser-diode. The
instrument converts analog signals from other devices and send those output values through Modbus
communications. The instrument is used with the Vista software to select the size range, count
period and flow rate. Complete data collection with Hach UDG or Vista software. Refer to the
software documentation for more information. Refer to
Figure 1 Product overview
1 AC power supply
2 Particle counter
3 Wall mounting brackets (4x)
4 Sensor outlet quick-connect fitting
5 Water weir overflow
6 English
D A N G E R
D A N G E R
Figure 1.
6 Water weir flow controller
7 Water weir drain junction (mounted 1.22 m (4 ft)
below the maximum head loss)
8 Mounting clips for weir
9 Sensor inlet quick-connect fitting
10 Electrical access ports