Freedom Inverter/Charger Operation - Xantrex 806-1020 Owner's Manual

Freedom HF InvChg Owners Guide.book Page 15 Wednesday, September 13, 2017 6:20 PM

Freedom Inverter/Charger Operation

Display Panel Operation
The Freedom HF features a display panel with three-digit LED
display to show inverter, AC source, and battery status information.
3
4
STATUS
Input Voltage (V)
Utility
Input Current (A)
Select
Battery
Output Power (kW)
Fault
Feature Description
1 Inverter Power button
• Press and hold for one second to turn the Freedom HF's
Inverter function ON or OFF (when AC Shore Power is
NOT present.)
• Press and hold for five seconds to adjust feature settings.
Go back to page 11 for instructions.
975-0390-01-01
1
2
FREEDOM HF
See NOTE in Feature # 4.
Feature Description
2 Three-digit LED display screen shows status information
and fault codes.
3 Status LED Indicates the mode of operation with a three-
color LED.
• Green pertains to Utility status.
• Solid indicates the Freedom HF is in shore power
mode and battery is fully charged.
• Flashing indicates the Freedom HF is in shore power
mode and the unit is currently charging the battery.
• Yellow pertains to Battery status.
• Solid indicates the Freedom HF is in inverter mode
and using the battery to provide AC power.
• Flashing indicates the Freedom HF is in inverter mode
but AC shore power is detected thus transferring to
shore power mode within 20 seconds.
• Red indicates a Fault condition and the Freedom HF has
shut down. See "Troubleshooting Reference" on page 38.
15