Type Of Racing - Aim Solo 2 DL User Manual

6.1 Type of racing

Solo 2 DL features two different type of races, each of them with different options:
n speed (left image below)
n performance (right image below)
Speed racing
Solo 2 DL automatically selects the track in which you are performing. After having
found the proper track, it may calculate and show:
n the lap times
n the predictive lap time: the time at the end of the current lap computed looking
at the actual speed, compared with a reference lap; the predictive lap time may
be shown as an Absolute Time (i.e. 1:34:45) or as a Gap (i.e. +/- 0.25 sec) between
the actual lap and a reference lap. The reference lap may be: n the best lap of the test or
n the best lap of the day
14
CHAPTER 6
"Memo trigger" " option allows you to decide when your Solo 2 DL starts recording.
Available options are:
n RPM or Speed values: Solo 2 DL starts recording when one of the
following condition is first met: RPM higher than 500 or speed higher
n Speed value: Solo 2 DL starts recording when speed is higher than 10 km/h than 10 km/h
Performance racing:
This racing mode shows you different performance options according to the measure
unit you set in "System settings" –> "Unit of measure" menu:
n using imperial unit of measure (mph) the available performance options are:
- 0 - 60 mph
- 60 - 0 mph
- 1/8 miles
- 1/4 miles
n using decimal unit of measure (km/h) the available options are:
- 0 -100 km/h
- 0 -160 km/h
- 100 m
- 150 m
- 400 m
- 1000 m
SOLO 2 DL
15