Configuring Solo 2 Dl As An Access Point Ap - Aim Solo 2 DL User Manual

2 – Existing network (to connect to an existing Wi-Fi network – WLAN)
This mode is complex and implies an external access point (AP) but it is also more
flexible and powerful because allows you to communicate with more than one device
and with more than one computer in the same network. Solo 2 DL and the PC must
connect to an existing Wi-Fi network made by a device that works as an external ac-
cess point.
When working in WLAN mode Solo 2 DL has two available security levels:
n network authentication: network password
n device authentication: Solo 2 DL password
Both levels allow you to use different strategies. A PC in WLAN, for example, can see
several AiM devices but can communicate only with those he knows the password of.
If you forget the password you can reset Wi-Fi configuration from Solo 2 DL menu as
explained before.
24
CHAPTER 7
7.1.2 Configuring Solo 2 DL as an access point (AP)
This is Solo 2 DL default configuration and is the easiest and most direct connection
mode, ideal if you want to communicate with one Solo 2 DL using one PC. It is free
and so completely accessible by anyone. Please set an access password as soon as
possible.
To establish a Wi-Fi connection:
n ensure that the Wi-Fi is enabled
n read your Solo 2 DL Name
n run Race Studio 3
n click Wi-Fi icon and select your
device
n in a few seconds the connection
is established
SOLO 2 DL
25