Led Bars Setting - Aim Solo 2 DL User Manual

7.2.5 Led-Bars setting
Led bar page sets Solo 2 DL top led bar working mode. Available options are shift
lights and predictive time.
Use as gear shift lights (default)
To use the led bar as shift lights, click the setting icon
n import/export shift lights setting using the proper buttons up. You can:
n decide the sequence mode of the LEDs enabling the desired option:
n a LED stays on if its threshold is exceeded
n a LED stays on until another LED with higher threshold turns on or
n link the shift lights to the engaged gear enabling the related checkbox; in this last
case you need to fill in max gear number and set LEDs colours and threshold
values for each gear.
42
CHAPTER 7
and the related panel shows
Use for predictive time
To use the LED bar for predictive lap time enable the related option and press the
setting icon .
You can:
n import/export shift lights setting using the proper buttons
n decide the sequence mode of the LEDs enabling the desired option:
n a LED stays on if its threshold is exceeded
n a LED stays on until another LED with higher threshold turns on or
n fill in the predictive time increment of each LED. The LED value indicates the time
gap to be assigned to each LED. Assuming you fill in "0.1" and your lap time is
improving of 0.3 sec toward the reference lap your, Solo 2 DL will switch on 3 LEDs
green; if, on the contrary, your lap time is worsening the LEDs will switch on red.
The lap considered as reference is the one you set using Solo 2 DL keyboard in
"Type of racing" (see the related paragraph).
SOLO 2 DL
43