Connection With Smartycam And Lcu One - Aim Solo 2 DL User Manual

14. Connection with SmartyCam and LCU-One
Your Solo 2 DL can be connected to AiM SmartyCam HD, SmartyCam GP HD and LCU-
One CAN as shown in the images below.
Please remember that all channels transmitted by these AiM expansions have to be
set in Race Studio 3 software as already explained in the related paragraphs ("LCU-
One CAN setting" and "SmartyCam stream setting").
Moreover for further information concerning SmartCam HD, SmartyCam GP HD and
LCU One refer to the related manuals you can download from "Documentation" area
of AiM website www.aim-sportline.com.
To connect Solo 2 DL to SmartyCam HD use SmartyCam CAN cable and connect 5
pins Binder connector placed bottom left of Solo 2 DL to 7 pins Binder connector pla-
ced rear left of SmartyCam HD as shown here below.
66
CHAPTER 14
To connect Solo 2 DL to SmartyCam GP HD use SmartyCam CAN cable and connect
5 pins Binder connector placed bottom left of Solo 2 DL to 7 pins central Binder con-
nector of SmartyCam HD as shown here below.
To connect Solo 2 DL to LCU-One CAN connect 5 pins Binder connector placed bot-
tom left of Solo 2 DL to 5 pins Binder connector of LCU-One as shown here below.
SOLO 2 DL
67