The Device Window; On The Track; Track Page - Aim Solo 2 DL User Manual

7.6 The device window

If you click your Solo 2 DL you enter the device window and have these options:
n Live Measures: to check all Solo 2 DL channels;
n Download: to download data, see the related chapter;
n Wi-Fi and Properties: to manage the Wi-Fi configuration – see the related paragraph;
n Settings to:
n set date format
n enable/disable daylight time
n set time format and time zone
n set backlight colour
n enable/disable night vision
n Tracks: to manage the tracks stored in the device memory
n Counters: to set each user odometer decimal places as well as reset it
n Logo: transmit/receive the logo that shows up when switching Solo 2 DL
on; supported image format are JPEG or BMP; always use the most recent
Windows TM versions (Windows8 or Windows10) whose graphic libraries are more
n Firmware: to check or update your Solo 2 DL firmware version. updated
54
CHAPTER 7 CHAPTER 8

8. On the track

Some Solo 2 pages are available for online visualization. To scroll them press "NEXT"
("Type of Race: Speed" only).
Pages can change according to the device configuration.

8.1 Track page

This is the first page that appears when
you switch Solo 2 DL on and can be re-
called pressing "TRACK" button. When
you start the engine of your car it goes
away automatically. It shows:
n on the left the selected track;
you can select a new one manually
or automatically ("MENU"/ Track
Management); in case of"Automatic"
selection the track is selected
according to the coordinates of your
vehicle; in case the track you are
running on is not included in your
Solo 2 DL database the laptimer
switches to"learning mode"as shown
in the bottom image here on the right
n on the right the satellite bar (visible
satellites and signal level of each one)
useful to evaluate the status of the
GPS signal.
SOLO 2 DL
55