Attaching The Cable - Pro-face GP-4311HT Installation Manual

Attaching the Cable

Connect the direct-connect cable to this product.
Step Action
1 Before connection, remove the cable's connector cap and this
product's connector cover. To remove the cable's connector cap,
pull out the cable by holding the cable connector.
1 Cable's connector cap
2 Cable connector
NOTE: To disconnect this cable from the connector cap, be sure to hold the
cable connector and pull it out. If you hold other parts of this cable (lock ring,
etc.), the cable cannot be disconnected.
2 As illustrated, line up the arrow on this product with the arrow on
the cable. Insert the cable connector into the product connector
until you hear it click.
1
1 Arrows
NOTE: Be sure to insert the cable connector as shown.
1 2
Connection
17