Connection; Connection With Peripheral Equipment - Pro-face GP-4311HT Installation Manual

Connection

Connection with Peripheral Equipment

A direct-connect cable (sold separately) is required to connect to external
devices for communication, power, or wiring of switches.
A conversion adapter (model number: AGP3000H-ADPCOM-01) is required to
build a system with an external output interface, such as DOUT.
NOTE:
• Use SELV (Safety Extra-Low Voltage) circuit and LIM (Limited Energy circuit) for DC power.
• Use only the SELV (Safety Extra-Low Voltage) circuit to connect the COM, USB, and LAN
interfaces.
Accessories for connecting the external devices to this
product directly
Prepare one of the following direct-connect cables (no connector). For cable
specifications and wiring, refer to the corresponding cable installation guide or
the GP4000H Series Hardware Manual.
Model number
GP3000H-CBLH-10M
GP3000H-CBLS-3M
GP3000H-CBLS-5M
GP3000H-CBLS-10M
Accessories for connecting Conversion Adapter to this
product
Prepare the conversion adapter or one of the following direct-connect cables
(with connector). For conversion adapter specifications and wiring, refer to the
conversion adapter installation guide.
NOTE: UL certification has been achieved for this product with the conversion adapter, and
with the following direct-connect cables.
Model number
GP3000H-CBLHD-10M
GP3000H-CBLSD-3M
GP3000H-CBLSD-5M
GP3000H-CBLSD-10M
.
14
Description
Hard-type cable. Heavy-duty type. Equipped with
common mode filter.
Soft-type cable. Standard type. Equipped with
common mode filter.
Description
Hard-type cable. Heavy-duty type.
Soft-type cable. Standard type.