Panel Display - Fujitsu M3097DE Cleaning And Maintenance

Panel Display

/
Button LED Function
Name of the button
and LED
Button Next
Previous
Exit
ENTER
(START)
(STOP)
LED
READ
CHECK
1-6
Function
LCD displays the next screen.
LCD displays the Previous screen.
Moves the cursor (blinking part) to the left
Moves the cursor (blinking part) to the right
• When "CHECK" LED lights, pressing this button releases error status (turn
off "CHECK" and returns to "Scanner Ready" screen).
• When you are setting on the operator panel, pressing this button returns to
"Scanner Ready" screen immediately.
The parameter selected by cursor becomes effective.
When Manual start mode is set or "READ" lamp lights, this button is effective and
starts the reading.
This button is effective during reading operation and stops the reading.
Indicates that the scanner is ON.
Indicates that the scanner is reading or ready to read.
• If it lights, it means that some alarm occurred. Pressing "Exit" button turns off
"CHECK" lamp.
• If it blinks at one second cycle, it means that jam or double feed is detected.
Removing the jammed paper turns off "CHECK" lamp. At double feed,
pressing "Exit" button turns off "CHECK" lamp.
• If it blinks at four seconds cycle, it means that ADF cleaning is necessary.