Fujitsu M3097DE Cleaning And Maintenance page 18

Document
10mm
Less than
3mm
Fan the sheets before setting
2
the document on the ADF paper
chute.
NOTE
• Remove paper clips and staples. Flatten the staple
holes .
• Read the following documents using the flatbed.
- Paper with a clip or staple.
- Paper that has ink which is not dry.
- Paper thickness is not constant, such as an envelope.
- Paper that has large rumples or curl.
- Paper that has folds or tears.
- Tracing paper.
- Coating paper.
- Carbon paper.
- Paper that is smaller than A6 size or larger than A3
width.
- Items other than paper, such as clothes, metal sheet,
or OHP film.
- Photographic paper.
- Paper that has perforations on its side.
- Paper that has a shape other than square.
- Paper that is very thin.
• Set the paper so that the top of it is curled as shown
below.
More than 30mm
Feed direction
Top of the paper Read surface
• Do not mix different width documents to avoid skew.
More than 30mm
Feed direction
Less than
5mm
Read surface
Top of the paper
2-3