Fujitsu M3097DE Cleaning And Maintenance page 20

Documents
Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
After the read command is issued
6
from the host system, scanned
documents are stacked in the
stacker for removal.
Guide lever
(Both sides)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the guides so that there is a
5
little amount of clearance between
the side edges and the guides.
Load the document face down on
the ADF paper chute and adjust
the guides to the document size.
NOTE
• Squeeze the guide lever to free the guides.
• Load documents so that the thickness is less than 8mm.
• Set the guides so that they touch the document sides.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
max 8mm
(0.32")
○ ○ ○ ○ ○
2-5