Feed Roller Parts - Samsung SCX-5530FN/XAZ Service Manual

Disassembly and Reassembly

5.24 Feed Roller Parts

1. Before you remove the Feed Roller Parts, you should
remove:
- Pick Up Roller Ass'y (Refer to 5.18)
- Duplex Guide Housing (Refer to 5.19)
- Middle Cover Ass'y (Refer to 5.21)
- MPF Housing (Refer to 5.23)
2. Remove the two screws securing the both side of the
Plate Push Bushing and then remove the Guides.
Plate Push Bushing
3. Pull up the Feed Idle Shaft and the Bushs (with
Spring).
Feed Idle Shaft
Spring
Bush
Service Manual
5-32
4. Release the E-Ring securing the Feed2 Gear and
remove it.
E-Ring
Feed2 Gear
5. Remove the three screws securing the Feed Bracket
Unit and then remove the Feed Bracket Unit and
Feed2 Shaft.
Feed Bracket Unit
Feed2 Shaft
Samsung Electronics