Feed Roller - Samsung CLX-3160FN Service Manual

Disassembly and Reassembly

5.20 Feed Roller

1. Before you remove the Feed Roller, you should
remove:
- HVPS (Refer to 5.14)
2. Remove the Feed Pulley and Belt, as shown below.
Feed Pully
Belt
3. Remove the Feed Gear and then remove the E-ring
from the Feed Shaft, as shown below.
Feed Gear
Notice: Be aware of the E-ring and Spring to ensure they
are not lost.
Service Manual
5-28
4. To remove the Feed Roller, first pull the Feed Roller
from the Bush and then take out the Feed Roller and
Feed Shaft, as shown below.
Feed Shaft
2
Notice : Do not grab the rubber part of the Feed Roller, it
may cause a malfunction due to a foreigen
object.
Feed Roller
1
Bush
Samsung Electronics