Samsung SCX-5530FN/XAZ Service Manual page 62

Alignment and Adjustments
5. Release the white strip, the rear cover stopper, and
fully open the rear cover, as shown.
1
rear cover stopper
2
rear cover
6. Unfold the duplex guide fully.
1
Service Manual
4-8
1
2
1
duplex guide
7. While pushing the fuser lever to the right, open the
fuser door.
1
8. Pull the jammed paper out.
If the jammed paper does not move when you pull,
push the pressure lever on each side up to loose the
paper, and then remove it.
1
9. Return the lever, door, stopper, and guide to their orig-
inal position.
10. Close the rear cover. Printing automatically resumes.
2
1
fuser lever
2
fuser door
1
pressure lever
Samsung Electronics