Samsung SCX-5530FN/XAZ Service Manual page 102

Disassembly and Reassembly
5. Release the Bush and rotate it until it reaches the slot,
as shown below. Then lift the Pick Up Ass'y out.
Pick Up Ass'y
2
6. Remove the two screws securing the ADF Upper and
remove it, as shown below.
ADF Upper
Notice : Before removing the ADF Engine part take
great care to note the position of the Ferrite
Core and the Motor Harness routing. When
refitting the ADF Engine part ensure that the
Harness and Ferrite are properly located and
are clear of the Motor Fan and White Bar Clip.
Service Manual
5-14
1
Bushing
7. Unplug the two connector and remove four screws
securing the ADF Motor Ass'y and then remove the
receptacle of the Ground Cable, as shown below.
Then take out the ADF Motor Ass'y.
ADF Lower
ADF Motor Ass'y
ADF Motor Ass'y
Samsung Electronics