Feed Roller - Samsung SCX-4100 Service Manual

5.15 Feed Roller

1. Before you remove the Feed Roller you should
remove:
- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)
- Scanner Ass'y (see page 5-4)
- Middle Cover (see page 5-6)
- LSU (see page 5-9)
- Drive Ass'y (see page 5-10)
2. Remove 2 screws from the Guide Paper and take it out.
Guide
Paper
3. Pull up the Feed Idle Bush and Feed Idle Shaft, as
shown below.
Feed Idle
Shaft
Bush
Samsung Electronics
Disassembly and Reassembly
4. Remove 3 screws from the Feed Bracket and take it out.
Feed Bracket
5. Remove the Idle Gear and Feed Gear2.
Feed Gear2
Idle Gear
6. Remove the Feed Gear 1 Ass'y, as shown below.
Feed Gear1
Ass'y
Service Manual
5-15