Disassembly and Reassembly
6. Release the six hooks securing the Scan Upper to the
Scan Lower and remove it, as shown below.
Scan Lower
7. Remove the CCD Cable, as shown below.
Core
Notice: You should connector remove the CCD Cable
vertically to avoid the CCD Cable pin damage.
Service Manual
5-16
8. Pull up the CCD Shaft and take out the CCDM.
Scan Upper
9. Squeeze the spring to release the tension in the Belt
CCD Cable
CCDM
and lift from the pulleys, as shown below.
Belt
CCD Shaft
Spring
Samsung Electronics