5.14 Shield SMPS Ass'y
1. Before you remove the Shield SMPS Ass'y, you
should remove:
- Side Cover Right (Refer to 5.7.3)
- Duplex Drive Ass'y (Refer to 5.13)
2. Unplug the two connectors (HVPS, Fuser).
3. Remove the three screws securing the Shield SMPS
Ass'y and remove it.
Samsung Electronics
Fuser Connector
HVPS Connector
Shield SMPS Ass'y
4. Unplug the connector (AC Inlet) and remove the four
screws securing SMPS and remove it.
Insulator Sheet
Disassembly and Reassembly
Shield SMPS (With AC Inlet)
AC Inlet Connector
SMPS
Service Manual
5-23