Samsung SCX-5530FN/XAZ Service Manual page 59

Digital laser mfp scx-5x30 series
Table of Contents

Advertisement

4.3.2 Roller misfeed
1. Open the scanner lid.
2. Seize the misfed paper, and remove the paper from
the feed area by carefully pulling it to the right using
both hands.
4.3.3 In the tray 1
1. Open and close the front cover. The jammed paper is
automatically ejected from the machine.
If the paper does not exit, go to the next step.
2. Pull the tray 1 open.
Samsung Electronics
1
1
scanner lid
3. Close the scanner lid. Then load the removed pages
back into the ADF.
Clearing paper jams
When a paper jam occurs, Paper Jam appears on the
display. Refer to the table below to locate and clear the
paper jam.
Caution : To avoid tearing the paper, pull out the
jammed paper gently and slowly. Follow the
instructions in the following sections to clear
the jam.
3. Remove the jammed paper by gently pulling it straight
out. If the paper does not move when you pull, or if
you do not see the paper in this area, check the fuser
area around the toner cartridge.
4. Insert the tray 1 into the machine until it snaps into
place. Printing automatically resumes.
Alignment and Adjustments
Service Manual
4-5

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCX-5530FN/XAZ and is the answer not in the manual?

This manual is also suitable for:

Scx-5530fn

Table of Contents

Save PDF